Logo
Nevíte si rady? Zavolejte.
0 ks
za 0,00 Kč
Nákupní košík je prázdný
Potřebujete poradit? Neváhejte nás kontaktovat.

Nebojte se změnit své povinné
ručení
. S ePojisteni.cz ušetříte.

Austin-Healey | Přední zavěšení

Orientační ceník ve formátu PDF ke stažení ZDE. Vyhledávání dle objednávkového čísla.
Postup objednávky naleznete ZDE.

Obj. čísloPopisIlustrace
klikněte pro zvětšení

Front Suspension and Components
VA1AHfront suspension repair kit - both sides (includes: king pin set (both sides), 4x VA09MGB-18, 2x VA70MGB, 8x VA5AH, 4x VA6AH)
Type: BN1-BJ8 required quantities: 1
VA3CAHset polyurethan bushes front axle and radius arm
Type: BN1-BJ8 required quantities: 1
VA5AHrubber bush inner wishbone
Type: BN1-BJ8 required quantities: 8
VA5AH/Pset polyurethan bushes front axle, inner
Type: BN1-BJ8 required quantities: 4
VA6AHcotter fulcrum pin + nut
Type: BN1-BJ8 required quantities: 4
VA6TRcrown nut king pin bolt
Type: BN1-BJ8 required quantities: 2
VA08MGB-18pin, fulcrum, link to shocker
Type: BN1-BJ8 required quantities: 2
VA09MGB-18bush bearing
Type: BN1-BJ8 required quantities: 4
VA09MGB/Pset polyurethan bushes, upper
Type: BN1-BJ8 required quantities: 4
VA10AHinner lower wishbone pin
Type: BN1-BJ8 required quantities: 4
VA11AHtop trunnion
Type: BN1-BJ8 required quantities: 2
VA11SPTgrease nipple UNF
Type: BN2-BJ8 required quantities: 4
VA12AHrebound rubber
Type: BN1-BJ8 required quantities: 2
VA16AHfront shocker
Type: BN1-BJ8 required quantities: 2
VA17AHfront shock sliding plate
Type: BN1-BJ8 required quantities: 2
VA17AH/Lbracket shock absorber LH with slotted holes (must be weld in)
Type: BN1-BJ8 required quantities: 1
VA17AH/Rbracket shock absorber RH with slotted holes (must be weld in)
Type: BN1-BJ8 required quantities: 1
VA21AHfront spring
Type: BN4-BJ8 required quantities: 2
VA22AHfront spring
Type: BN1-BN2 required quantities: 2
VA23AHfront axle bump rubber
Type: BN1-BJ8 required quantities: 2
VA25AHfront spring pan
Type: BN1-BJ8 required quantities: 1
VA25aAHlowering set frontaxle (1,5 - 2,0 cm), does both sides (consist of bushes and longer screws to fit underneath the front spring pan; absolutely easy to mount)
Type: BN1-BJ8 required quantities: 1
Va25bAHlowering set front axle (with VA80AH)
Type: BN1-BJ8 required quantities: 1
VA27AHtop dust tube
Type: BN1-BJ8 required quantities: 2
VA28AHspring
Type: BN1-BJ7<21766 required quantities: 2
VA30AHdust excluder bottom king pin
Type: BN4-BJ8 required quantities: 2
VA40AH/Rfitting plate roll-bar link right
Type: BN1-BJ8 required quantities: 1
VA40AH/Lfitting plate roll-bar link left
Type: BN1-BJ8 required quantities: 1
VA45AHset (4) Nylotron bush bearing, upper (to submite negative wheel camber)
Type: BN1-BJ8 required quantities: 1
SR50pin
Type: BN1-BJ8 required quantities: 2
SR51pin
Type: BN1-BJ8 required quantities: 2
SR52pin
Type: BN1-BJ8 required quantities: 2
VA60AHfiber gasket 1/4“
Type: BN1-BJ8 required quantities: 4
VA61AHpin cotter
Type: BN1-BJ8 required quantities: 2
VA62AHring, cork
Type: BN1-BJ8 required quantities: 4
VA63AHbush, top
Type: BN1-BJ8 required quantities: 2
VA64AHbush, bottom
Type: BN1-BJ8 required quantities: 2
VA65AHtop trunnion bearing kit (pair) - replaces thrust washer. The steering is easier to handle.
Type: BN1-BJ8 required quantities: 1
VA66AHbush, rear
Type: BN1-BJ8 required quantities: 2
VA67AHbush, front
Type: BN1-BJ8 required quantities: 2
VA68AHpin, fulcrum, lower link, outer
Type: BN1-BJ8 required quantities: 2
VA80AHmounting kit Koni front shocker (adjustable) * - with TÜV-approval (shocker not included) 90211
Type: BN1-BJ8 required quantities: 1
VA80aMGBshocker Koni to no. VA80AH
Type: BN1-BJ8 required quantities: 2
VA2aAHreamer, king pin bush
Type: BN1-BJ8 required quantities: 1
HSDshocker oil, 0.5 litre
Type: BN1-BJ8

Please note that on 100/4 models (BN1 up to chassis number 221403) the threads used have been almost exclusively B.S.F. The nuts and bolts referred to in the illustration are for the later BN2-BJ8 models with UNF thread! - You will find details of the B.S.F nuts and bolts in the separate chapter Bolts/Nuts.
* Note to no. VA80AH: Easily installed to every car, while the orig. shock absorbers are retained with their internal control valves removed. Kit complete with fitting instructions.
Facebook
Kde nás najdete

Historic cars, s.r.o.
Mořice 183
798 28 Mořice

Kontakty
Zákaznická podpora Historic Cars
(Po-Pá)
© 2019 Historic cars, s.r.o. - náhradní díly a příslušenství pro klasické vozy.
Vytvořeno na Eshop-rychle.czEshop-rychle.cz
Zpracování osobních údajů můžete ovlivnit úpravou svých preferencí ochrany soukromí.